![]()
| The future of affordable, renewable residential energy is wind. You’ll be amazed by the wind power you can harness with wind generators and turbines. Wind is the future of tomorrow!
With 400 Watts of power at 28 mph winds, the powering possibilites are endless!
The Air-X builds upon what has made AIR the world's #1 selling small wind turbine. The new technology used in the Air-X was only previously found in mega-watt-class wind turbines.
The AIR-X is an ideal product for the person that needs a little power for basic appliances such as TV, radio and a few lights.
Our customers found this item to be most useful for applications such as alternate power for remote cabins, remote monitoring stations, telecommunication towers, and many more applications. The alternate power applications are endless.
The AIR-X uses a new microprocessor based technology that results in an increase in performance, battery charging capability, and reliability. Additionally, "flutter" noise from the machine has been reduced.
The controller allows for peak-power tracking of the wind by optimizing the alternator's output on all points of the cubic curve and efficiently delivers the energy to the battery. The turbine's smart controller allows it to actually control blade rotation speed thus eliminating the buzzing noise commonly found with most small wind turbines.
Much Lower Noise:
Previous AIR wind modules relied on their aero-elastic blade design for protection in high winds. This caused a loud flutter noise in winds above 35 mph (16 m/s). AIR-X’s circuit monitors the wind speed and electronically slows the blades as it reaches its rated output preventing it from going into flutter. This results in a much quieter wind turbine. In high winds, the AIR-X will continue to produce power at a reduced level until the wind decreases, at which point maximum potential output will resume.
Improved Battery Charging:
Previous AIR designs required 300-400 amp hour battery banks so the trickle charge of the wind turbine could be adequately absorbed. The AIR-X’s charge controller periodically stops charging, reads the battery voltage, compares it to the voltage setting and if the battery is charged, it completely shuts off all current going to the battery. This function is performed within a few milliseconds. The closer the battery is to reaching its full state of charge, the more often the AIR-X’s circuit repeats this action. This means any size battery bank from 25 to 25,000 amp hours or higher can be charged safely. When the battery has reached its charged state, the AIR-X will slow to an almost complete stop. Only when the battery has dropped below its voltage set point will it startup and resume charging.
Lower stress design:
AIR-X limits power on the input side of the electronics by controlling the torque from the blades. The power no longer has to be dissipated by the electronics resulting in lower stress on the circuit, bearings and other materials. Furthermore, stress on wind turbines occurs primarily in high winds. Under these conditions, the electronic stall design reduces the blade speed to 600 rpm, thereby significantly reducing turbine and tower loading while still producing power. The Benefit: Greater confidence in turbine operation in high wind conditions without manually operating the stop switch. Improved resistance to the effects of the sun, wind and water: AIR-X marine has vastly improved body preparation and applications of the marine paint during manufacture, ensuring durable powdercoat protection of the body and internal components, even when subjected to the most extreme sun, wind and water conditions.
Tower Kits & accessories for this product are available by clicking the Accessories tab above.
Need help? Call 877-LIVE-ETP / 877-548-3387.
|
![]()
|
Specifications: |
| Rotor Diameter: |
46 inches (1.15 m) |
| Weight: |
13 lbs. (5.85 kg) |
| Mount: |
1.5” schedule 40 pipe (1.9” OD, 48 mm) |
| Start-Up Wind Speed: |
8 mph (3.58 m/s) |
| Voltage: |
12, 24 and 48 VDC available (select from above drop down menu) |
| Rated Power: |
400 watts at 28 mph (12.5 m/s) |
| Turbine Controller: |
Microprocessor-based smart internal regulator with peak power tracking |
| Body: |
Cast aluminum - Aircraft quality aluminum alloy castings |
| Blades: |
(3) Carbon Fiber Composite Blades |
| Overspeed Protection: |
Electronic torque control |
| Kilowatt Hours: |
38 kWh/mo @12 mph (5.4 m/s) |
| Survival Wind Speed: |
110 mph (49.2 m/s) |
| Warranty: |
3 Year Limited Warranty |
 Additional Air-X Specs
Air-X Owner's Manual
Air-X Wiring Chart |
![]()
| Product Features:
| • | The AIR-X is an ideal product for the person that needs a little power for basic appliances such as TV, radio and a few lights. |
| • | Quite operation |
| • | Exclusive Auto-brake-feature that slows the AIR to a silent spin when the batteries are charged thus extending bearing life and reducing noise. |
| • | Unprecedented 3-YEAR WARRANTY. |
| • | Carbon Fiber Composite Blades. |
| • | Aircraft quality aluminum alloy castings. |
| • | Exclusive Brush-less neodymium cubic curve alternator. |
| • | Sophisticated internal battery charge regulator. |
| • | Maintenance-free - Only two moving parts. |
|
![]()
|
|
|
| 27' Air Guyed Tower Kit for Air-X |  | This tower kit is designed specifically for the Air X (and 403) wind turbines. Kit Includes: (1) Base Connector, (1) Lower Wire Set (160 ft. pre-cut), (2) Base Staples, (2) 3/8" x 1 ½" Bolts, (2) 3/8" Locknuts, (4) Cable Thimbles
(8) Cable Clamps
Does not include poles & anchors
| Reg Price: $299.95
Our Price: $260.00 | |
|
|
| 45' Air Guyed Tower Kit | | The 45 ft Guyed Tower Kit is specifically designed for the Air X Land Wind Generators, these Guyed Tower Kits will ensure the safety and performance of your Air X Wind Generator.
What's Included: (1) Base Connector, (1) Upper Wire Set (280 ft. pre-cut), (1) Lower Wire Set (160 ft. pre-cut), (2) Base Staples, (3) 3/8" x 1 ½" Bolt, (3) 3/8" Locknut, (8) Cable Thimbles, (16) Cable Clamps, (1) Set Up Kit (1 - Gin Pole Cap, 1 - 100 Ft. Rope, 3 - Snap Links, 1 - 8 Ft. Cable, 1 - 3/8" x 1-1/2" Bolt, 1 - 3/8" Locknut)
Does not include poles & anchors | Reg Price: $499.00
Our Price: $461.00 | |
|
|
| 29' EZ Tower Kit - Includes Pipes and All Hardware | | The EZ Tower comes with all the
parts needed with the exception of the power wire.
No Concrete, No Gin Pole, No Winching needed. All materials included - even pipe!
Entire kit ships in 74" box, weight is 80 lbs.
Fully engineered to 110 mph winds!
Galvanized tubing, cable and hardware.
Ships via UPS anywhere | Reg Price: $945.00
Our Price: $887.00 | |
|
|
| 36" Augers (Set of 4 Earth Anchors) | | 36" Augers (Set of 4 Earth Anchors) - Recommended to be used with the 27' Air Guyed Tower Kit for Air-X to anchor the guyed cables into the ground. | Reg Price: $179.99
Our Price: $168.00 | |
|
|
| 48" Augers (Set of 4 Earth Anchors) | | 48" Augers (Set of 4 Earth Anchors) - Recommended to be used with the 45' Air Guyed Tower Kit for Air-X to anchor the guyed cables into the ground. | Reg Price: $215.00
Our Price: $191.00 | |
|
|
| Stop Switch Kit for Air-X | | 50A DC, Single Pole Double throw switch to stop AIR 403 and AIR X Wind Turbines. Important for maintenance and installation. This switch shorts the output of the generator while disconnecting the battery, and acts as an electric brake on the generator. | Reg Price: $51.99
Our Price: $42.99 | |
 |
|
 Share your comments about Air-X Land Residential Wind Turbines | |
| |   Regular Price: $995.00 Our Price: $789.00 FREE SHIPPING |  Regular Price: $1,069.00 Our Price: $969.00 FREE SHIPPING |  Regular Price: $1,200.00 Our Price: $1,040.00 FREE SHIPPING |  |  |  Regular Price: $399.00 Our Price: $299.00 FREE SHIPPING |
|
|
Read More
Submit Testimonial